FWD_DND_SYNCHRO_ENABLE_nParameter Name Example FWD_DND_SYNCHRO_ENABLE_1, FWD_DND_SYNCHRO_ENABLE_2,…, FWD_DND_SYNCHRO_ENABLE_6Value Format BooleanDescription Specifies whether to synchronize the Do Not Disturb and Call Forwardsettings, configured via the Web user interface or phone user interface,between the unit and the portal server that is provided by your phonesystem dealer.Note• Even if you specify "Y", this feature may not function properly ifyour phone system does not support it. Before you configurethis setting, consult your phone system dealer.• You cannot set both "SHARED_CALL_ENABLE_n" and"FWD_DND_SYNCHRO_ENABLE_n" to "Y" at the same time.Value Range • Y (Enable Do Not Disturb/Call Forward synchronization)• N (Disable Do Not Disturb/Call Forward synchronization)Default Value NWeb User Interface Reference Synchronize Do Not Disturb and Call Forward (Page 127)RESOURCELIST_URI_nParameter Name Example RESOURCELIST_URI_1, RESOURCELIST_URI_2,…, RESOURCELIST_URI_6Value Format StringDescription Specifies the Uniform Resource Identifier string for the resource list,which consists of "sip:", a user part, the "@" symbol, and a host part,for example, "sip:user@example.com".For details, refer to RFC 4662.Note• In a SIP URI, the user part ("user" in the example above) cancontain up to 63 characters, and the host part ("example.com"in the example above) can contain up to 127 characters.• When the BLF feature is assigned to a flexible button, it may benecessary to specify this parameter depending on your phonesystem. For details about flexible buttons, see 6.3 FlexibleButtons (KX-UT133/KX-UT136/KX-UT248 only).Value Range Max. 195 characters (except ", &, ', :, ;, <, >, and space)Default Value Empty stringWeb User Interface Reference Resource List URI (Page 128)Document Version 2012-06 Administrator Guide 2415.7.1 Call Control Settings
