Download Timing ExplanationNone (prohibited) If you want to prohibit units from changing their settings by downloadingconfiguration files, you can enable this function from the Web user interface.The following operations will be prohibited:– Pre-provisioning– Provisioning at startup– Provisioning at regular intervals– Provisioning by sending a NOTIFY message• In the configuration file:– Add the line, PROVISION_ENABLE="N".• In the Web user interface:– Click the [Maintenance] tab, click [Provisioning Maintenance],and then select [No] for [Enable Provisioning].• To enable provisioning again, in the Web user interface:– Click the [Maintenance] tab, click [Provisioning Maintenance],and then select [Yes] for [Enable Provisioning].2.2.5 Provisioning Server Setting ExampleThis section gives an example of how to set up the units and provisioning server when configuring 2 units withconfiguration files. The standard configuration files and the master configuration file are used in this example.ConditionsItem Description/SettingProvisioning server FQDN prov.example.comUnits’ MAC addresses • 0080F0111111• 0080F0222222URL of the configuration files Configure the following 2 settings either by pre-provisioning or through theWeb user interface. The values of both settings must be the same.• CFG_STANDARD_FILE_PATH="http://prov.example.com/Panasonic/Config{MAC}.cfg"• CFG_MASTER_FILE_PATH="http://prov.example.com/Panasonic/ConfigCommon.cfg"Directory on the provisioningserver containing theconfiguration filesCreate the "Panasonic" directory just under the HTTP root directory of theprovisioning server.File name of configurationfilesStore the following configuration files in the "Panasonic" directory.• Contains the common settings for the 2 units:– ConfigCommon.cfg• Contains the settings unique to each unit:– Config0080F0111111.cfg– Config0080F0222222.cfgDocument Version 2012-06 Administrator Guide 432.2.5 Provisioning Server Setting Example
