Value Range Max. 64 charactersNote• An empty string is not allowed.• If "{mac}" is included in this parameter, it will be replaced withthe unit’s MAC address in lower-case.• If "{MAC}" is included in this parameter, it will be replaced withthe unit’s MAC address in upper-case.• If "{MODEL}" is included in this parameter, it will be replacedwith the unit’s model name.• If "{fwver}" is included in this parameter, it will be replaced withthe firmware version of the unit.Default Value Panasonic_{MODEL}/{fwver} ({mac})Web User Interface Reference HTTP User Agent (Page 91)HTTP_SSL_VERIFYValue Format IntegerDescription Specifies whether to enable the verification of the root certificate.Value Range • 0 (No verification of root certificate)• 1 (Simple verification of root certificate)• 2 (Precise verification of root certificate)Note• If set to "0", the verification of the root certificate is disabled.• If set to "1", the verification of the root certificate is enabled. Inthis case, the validity of the certificate’s date, certificate’s chain,and the confirmation of the root certificate will be verified.• If set to "2", precise certificate verification is enabled. In thiscase, the validity of the server name will be verified in additionto the items verified when "1" is set.• If the unit has not obtained the current time, verification will notbe performed irrelevant of this setting. In order to performverification it is necessary to first set up the NTP server.Default Value 05.4.6 Time Adjust SettingsNTP_MODEValue Format IntegerDescription Specifies the NTP synchronization mode.224 Administrator Guide Document Version 2014-045.4.6 Time Adjust Settings
