For details about available characters for the dial format, see Available Values for the Dial Plan Field inthis section.3. Select [Yes] or [No] for [Call Even If Dial Plan Does Not Match].• If you select [Yes], the call will be made even if the user dials a phone number that does not matchthe dial format in [Dial Plan].• If you select [No], the call will be made only if the user dials a phone number that matches the dialformat in [Dial Plan].Note• For details about configuring these settings by configuration file programming, see "DIAL_PLAN" and"DIAL_PLAN_NOT_MATCH_ENABLE" in 5.7.2 Per Line - Call Control Settings.Available Values for the Dial Plan FieldThe following table explains which characters you can use in the dial format, and what the characters mean.Element Available Value DescriptionString 0–9, [, -, ], <, :, >, *, #, !,S, s, T, t, X, x, ., |, +You can enter dial plan descriptions using a combination ofthe characters listed as available values.Digit 0–9, *, #, + Example: "123"If the dialed phone number is "123", the call is madeimmediately.Wildcard X, x Example: "12xxxxx"If the dialed phone number is "12" followed by any 5-digitnumber, the call is made immediately.Range [ ] Example: "[123]"If the dialed phone number is either one of "1", "2", or "3", thecall is made immediately.Subrange - Example: "[1-5]"If the dialed phone number is "1", "2", "3", "4", or "5", the callis made immediately.• A subrange is only valid for single-digit numbers. Forexample, "[4-9]" is valid, but "[12-21]" is invalid.Repeat . Example: "1."If the dialed phone number is "1" followed by zero or more"1"s (e.g., "11", "111"), the call is made.Substitution <(before):(after)> Example: "<101:9999>"If the dialed phone number is "101", "101" is replaced by"9999", and then the call is made immediately.Timer S, s (second) Example: "1x.S2"If the dialed phone number begins with "1", the call is madeafter a lapse of 2 seconds.• The number (0–9) followed by "S" or "s" shows theduration in seconds until the call is made.290 Administrator Guide Document Version 2014-046.2.1 Dial Plan Settings
