Panasonic KX-VC500 Operating Manual

Also see for KX-VC500: User guide Brochure User manual Operating manual

Contents

Panasonic KX-VC500 Operating Manual Manual pdf 78 page image

(This mode switches the display resolutionaccording to the condition of the network.)– "Auto" (default): This mode selects either "FullHD" or "HD" according to the availablebandwidth.Note• Selecting "Auto" or "HD" is recommended.• When "Full HD" is selected, if the otherparty has a low bandwidth, the displayresolution may be lower than when "HD" or"Auto" is selected.• If the field frequency is different betweenparties in a video conference call, themaximum resolution will be "HD", even ifyou have specified "Full HD".• When making a 3-party video conferencecall, the main video camera will beautomatically set to "HD", even if you havespecified "Full HD".• When making a 4-party video conferencecall, the main video camera and sub videocamera will be automatically set to "HD",even if you have specified "Full HD"."Default MIC Mute set": Use [ ][ ] to selectwhether to mute the microphone(s) at the start of areceived video conference call.– "ON": Mutes the microphone(s).– "OFF" (default): Does not mute themicrophone(s)."Active call Menu": Use [ ][ ] to select whetherto display the guide when a video conference callbegins.– "ON" (default): Displays the guide.– "OFF": Hides the guide."Noise reduction": Use [ ][ ] to select whetherto enable noise reduction when a video conferencecall begins.– "ON": Enables noise reduction.– "OFF" (default): Disables noise reduction."Call Limit time": Enter the maximum length oftime for the duration of a video conference call (inhours and minutes).Note• If you set 0 hours 0 minutes (default), thecall time is unlimited.• If the duration of a video conference callexceeds the specified length of time, the callwill be automatically disconnected."MIC detection": Use [ ][ ] to select whether toenable the detection of the connection status of theBoundary Microphones.– "ON" (default): Enables the detection ofBoundary Microphones.– "OFF": Disables the detection of BoundaryMicrophones.Note• When not using Boundary Microphones, setthis to "OFF"."Network Connection Status": Use [ ][ ] toselect whether to display the network statusindication.– "ON" (default): Displays the network statusindication.– "OFF": Hides the network status indication."Still image quality": Use [ ][ ] to select thedisplay resolution to use when you send still imagesfrom the sub video camera to other parties.– "Full HD" (default): The resolution of stillimages is Full HD.– "HD": The resolution of still images is HD.Note• If the network has low bandwidth and ahigh rate of packet loss, selecting"HD" is recommended. For details,contact your dealer.• If the field frequency is differentbetween parties in a video conferencecall, the display resolution will be "HD",even if you have specified "Full HD".• During a 4-party video conference call,the display resolution will be "HD", evenif you have specified "Full HD".5. Press [G].• A dialog box to confirm the saving of settings isdisplayed.6. Use [ ][ ] to select "Yes" and press [Enter].• The system settings screen is displayed.7. Press [Home].• The Home screen is displayed.Display Unit InformationYou can view the setting information for the unit.78 Operating Manual Document Version 2011-02Contacts and Settings