Panasonic KX-VC500 Operating Manual

Also see for KX-VC500: User guide Brochure User manual Operating manual

Contents

Panasonic KX-VC500 Operating Manual Manual pdf 83 page image

4. Use [ ][ ] to select "Network Test" and press[Enter].• The network test screen is displayed.5. Enter an IP address.• If the IP address contains 1 or 2 digit numbers,enter these numbers as they are. Do not enterlike [.001].Example: The IP address is [192.168.0.1].– Correct entry: [192.168.0.1]– Wrong entry: [192.168.000.001]6. Press [R].• The network test starts. After the network test isfinished, if the network test was successful ortimed out, the details of the results aredisplayed. If the network test failed, a messageindicating the failure is displayed.7. Press [Home].• The Home screen is displayed.Performing Self DiagnosisYou can check how your image will be displayed andhow your voice will be heard to the other party beforestarting a video conference call, using your own displayand speakers.1. Press [Menu].• The Menu screen is displayed.2. Use [ ][ ] to select "Settings" and press[Enter].• The system settings screen is displayed.3. Press [ ].• The second page is displayed.4. Use [ ][ ] to select "Self Diag." and press[Enter].• The self diagnosis screen is displayed with thedialog box.Note• You can hide or display the dialog box bypressing [B].• Set the microphone at least 1 m (3.3 ft)away from the speakers.5. Press [R].• The self diagnosis starts.Note• Check the image that is displayed from themain video camera.• To avoid feedback, slowly raise the volumeusing the remote control’s [+] button.• When someone speaks into themicrophone, confirm whether the soundplays back through the speakers.• During self diagnosis, all BoundaryMicrophones will be set to "Centerstereo".• During self diagnosis, the tone will be set to"Standard".6. Press [R].• The self diagnosis ends.Document Version 2011-02 Operating Manual 83Contacts and Settings