- 135 -Advanced (Playback)You can copy the data of the pictures you have taken from the built-in memory to a card orfrom a card to the built-in memory.Select [COPY] on the [PLAYBACK] mode menu. (P23)Press 3/4 to select the copy destination and thenpress [MENU/SET].Press 2/1 to select the picture and then press [MENU/SET].Press 3 to select [YES], and then press [MENU/SET].• If you press [MENU/SET] while copying pictures from the built-inmemory to the card, the copying will stop halfway.• Do not turn the camera off at any point during the copyingprocess.Press [‚] to return to the menu screen.• Press [MENU/SET] to close the menu.• If you copy from the built-in memory to a card, all the pictures are copied and then thescreen automatically returns to the playback screen.Note• If you copy picture data from the built-in memory to a card which does not have sufficient freespace, the picture data will only be copied halfway. We recommend using a card which hasmore free space than the built-in memory (about 40 MB).• If a picture exists with the same name (folder number/file number) as the picture to be copied inthe copy destination when [ ] is selected, a new folder is created and the picture is copied.If a picture exists with the same name (folder number/file number) as the picture to be copied inthe copy destination when [ ] is selected, that picture is not copied. (P158)• It may take time to copy the picture data.• Only pictures recorded with a Panasonic digital camera (LUMIX) will be copied.(Even if the pictures were recorded with a Panasonic digital camera, you may not be able tocopy them if they were edited with a PC.)• Print settings on the original picture data will not be copied. Set the print settings again aftercopying is finished.[COPY]: All the picture data in the built-in memory are copiedonto the card at one time. > step 4.: One picture at a time is copied from the card to thebuilt-in memory. > step 3.
