Connecting to other equipment- 140 -Note• This unit cannot be stood upright when the AC adaptor is connected. When placing it down andoperating, we recommend placing it on a soft cloth.• Do not use any other USB connection cables except the supplied one.Use of cables other than the supplied USB connection cable may cause malfunction.• Turn the camera off before connecting or disconnecting the AC adaptor (optional).• Before inserting or removing a card, turn the camera off, and disconnect the USB connectioncable.• You cannot switch between the built-in memory and the card while the camera is connected tothe printer. Disconnect the USB connection cable, insert (or remove) the card and then connectthe USB connection cable to the printer again.Connect the camera to a printer via the USB connection cable A(supplied).• When the camera is connected to the printer, the cable disconnect prohibit icon [å]appears. Do not disconnect the USB cable while [å] is displayed.Press 3/4 to select [PictBridge(PTP)], and thenpress [MENU/SET].Selecting a single picture and printing itPress 2/1 to select the picture and then press[MENU/SET].• The message disappears in about 2 seconds.Press 3 to select [PRINT START] and then press[MENU/SET].• Refer to P142 for the items which can be set before starting toprint the pictures.• Press [MENU/SET] to cancel printing halfway.• Disconnect the USB connection cable after printing.USB MODESELECT SETPLEASE SELECTTHE USB MODEPictBridge(PTP)PCPictBridgeMULTI PRINT100-0001100-0001PLEASE SELECTTHE PICTURE TO PRINT12SELECT PRINTOFF1CANCEL SELECT SETPRINT STARTPRINT WITH DATENUM. OF PRINTSPAPER SIZEPAGE LAYOUTSINGLE SELECT
