Others97TroubleshootingIf you put the menu back to the settings at the time of purchase, the conditions may beimproved. Carry out the [RESET] in the setup menu. (P21)Conditions CausesThe camera will not turnon.Is the battery inserted correctly? Check the direction of thebattery.Is the battery sufficiently charged?Use a battery that has been sufficiently charged.The picture is notdisplayed on the LCDmonitor.Are the power save mode (P20) or economy mode (P21)activated? Press the shutter button halfway to disactive thesemodes.Is the battery charge insufficient to operate the camera? Usea battery that has been sufficiently charged.Is the built-in flash charging? While the flash is beingcharged in economy mode, the LCD monitor is off.The brightness of thescreen becomes dark orbright for a moment.This phenomenon appears when pressing the shutter buttonhalfway to set the aperture value and does not affect therecorded pictures.The picture cannot berecorded.Is the card inserted?Is the mode dial correctly set?Is there any memory capacity left on the card?Before recording, delete some pictures.The screen is too brightor dark.Adjust the brightness of the screen. (P20)Is the Power LCD function activated? (P24)Flash is not activated. Is the flash mode set to Forced OFF? Change the flashmode. (P36)The flash is not activated when [SCENERY],[NIGHT SCENERY], or [FIREWORKS] in scene mode isselected.The flash is activated2 times.The first flash is activated for red-eye prevention on thesubject (red-eye phenomenon). 1 second after, the flash isactivated again for recording.Unreadable languagewas selected by mistake.Select [ ] icon on the [SETUP] menu to set the desiredlanguage.The subject is notfocused properly.The focus range varies depending on the recording mode.Rotate the mode dial to set to the proper mode for thedistance to the subject.Is the subject out of the focus range? (P29)When you cannot focus on the subject even if you tried manytimes, turn the camera off once and turn it on again.