Others122Message Display[NO MEMORY CARD]Insert the card.[THIS MEMORY CARD ISPROTECTED]Cancel the card lock.[NO VALID IMAGE TO PLAY]Play back after recording or afterinserting the card with a recordedpicture.[MEMORY CARD FULL] /[NOT ENOUGH MEMORY IN THECARD]Insert a new card or delete theunnecessary data.[PLEASE CLOSE THE FLASH]Be sure to close the flash after use.[MEMORY CARD DOOR OPEN]Close the card door.[PLEASE SET THE CLOCK]This message appears when you usethe camera for the first time or you donot use the camera for a long time.Set the clock.[THIS PICTURE IS PROTECTED]After cancelling the protect setting, youcan delete or overwrite the picture.[THIS PICTURE CAN’T BEDELETED] / [SOME PICTURES CAN’TBE DELETED]The pictures not based on the DCFstandard cannot be deleted.[CAN’T BE SET ON THIS PICTURE] /[CAN’T BE SET ON SOMEPICTURES]If the pictures are not based on the DCFstandard, the DPOF print cannot be set.[NO ADDITIONAL DELETESELECTIONS CAN BE MADE]You have exceeded the number ofpictures that can be set at once withmulti-delete setting.[MEMORY CARD ERRORFORMAT THIS CARD?]The format of the card cannot berecognized by this camera. Format thecard again with this camera.[SYSTEM ERROR]This message appears when amalfunction occurs on the operation ofthe lens. Turn the camera off and on. Ifthe message persists, contact thedealer or your nearest servicentre.[MEMORY CARD ERROR](It may take time to display thismessage depending on the card.)Failed access to the card.Insert the card again.[READ ERROR]Data reading error.Play it back again.[WRITE ERROR]Data writing error.Turn the camera off and remove thecard. Then insert the card and turn thecamera on again. Be sure that thecamera is turned off before removing orinserting the card to avoid damage.[PLEASE WAIT]This message appears when shutterspeed is slow or the camera becomeswarm.
