Panasonic LUMIX DMC-LC1EB Operating Instructions Manual

Also see for LUMIX DMC-LC1EB: Service manual

Contents

Others123Troubleshooting1: The camera is not turned on.1-1: Are the battery inserted or the ACadaptor correctly connected?Check the connection.1-2: Is the battery sufficiently charged?Use the battery that has beensufficiently charged.2: As the camera is turned on, itturns off immediately.2: Is the battery charge insufficient tooperate the camera?Use the battery with charged one.3: The brightness of the screenchanges dark or bright for amoment.3: This phenomenon appears whenpressing the shutter buttonhalfway to set the aperture valueand does not affect the recordedpictures.4: The picture cannot be recorded.4-1: Is the card inserted?4-2: Is the operational mode dialcorrectly set? Check it.4-3: There is no memory capacity lefton the card. Before recording,delete some pictures.5: The picture is not displayed onthe screen.5: Is the lens cap attached? Detach itbefore turning on the camera inrecording mode.6: The screen is too bright or dark.6: Adjust the brightness of thescreen.7: The colour of the screen isunusual.7: Colour around the subject withhigh luminance may look differentwhile you press the shutter buttonhalfway. This is not a malfunction.This is caused by adjusting theaperture value.8: Flash is not activated.8: Is the flash closed?Press the [ OPEN] button toopen the flash.9: Unreadable language wasselected by mistake.9: Select [ ] icon on the [SETUP]menu to set the desired language.10: The indication of the aperturevalue and the shutter speed arenot changed though we takepictures with auto bracket.10: When the compensation range ofthe exposure is reduced, theindications are not changed.However, the actual aperturevalue and the shutter speed aredifferent from the indicated values.11: The subject is not focusedproperly.11-1: Is the subject out of the focusrange? (P38)11-2: When you cannot focus on thesubject even if you tried manytimes, once turn the camera offand turn it on again.12: The picture is not played back.12-1: Is the card inserted?12-2: Is there a picture in the card?12-3: Is the operational mode dial set toplayback [ ]?