10 VQT2T42 (ENG)About batteries that you can use with this unitSupplied battery or dedicated optional batteries (DMW-BCF10PP) can be used withthis camera.It has been found that counterfeit battery packs which look very similar to the genuineproduct are made available to purchase in some markets. Some of these battery packsare not adequately protected with internal protection to meet the requirements ofappropriate safety standards. There is a possibility that these battery packs may leadto fi re or explosion. Please be advised that we are not liable for any accident or failureoccurring as a result of use of a counterfeit battery pack. To ensure that safe products areused we would recommend that a genuine Panasonic battery pack is used.• Use the dedicated charger and battery.• The camera has a function for distinguishing batteries which can be used safely.The dedicated battery supports this function. The only batteries suitable for usewith this unit are genuine Panasonic products and batteries manufactured byother companies and certified by Panasonic. (Batteries which do not support thisfunction cannot be used). Panasonic cannot in any way guarantee the quality,performance or safety of batteries which have been manufactured by othercompanies and are not genuine Panasonic products.• The battery is not charged when the camera is shipped. Charge the battery before use.• Charge the battery with the charger indoors.• Charge the battery in a temperature between 10 °C to 35 °C (50 °F to 95 °F). (Thebattery temperature should also be the same.)1 Attach the battery paying attention to the directionof the battery.90°2 Connect the charger to the electrical outlet.• Charging starts when the [CHARGE] indicator Alights green.• Charging is complete when the [CHARGE]indicator A turns off (after approx. 100 min).3 Detach the battery after charging is completed.Charging the Battery