Panasonic Lumix DMC-F2 Operating Instructions Manual

Also see for Lumix DMC-F2: Specifications Basic operating instructions Operating instructions Basic operating instructions

Contents

12 VQT2T42 (ENG)ChargingSupplied battery Optional batteryCharging time¼ Approx. 100 min Approx. 130 minwith the supplied chargerThe charging time will vary slightly depending on the status of the battery and theconditions in the charging environment.When the charging has been completed successfully, the [CHARGE] indicator turns off.Note• The battery may swell and its operating time may become shorter as the number oftimes it is charged increases. For long term battery use, we recommend you do notfrequently charge the battery before it is exhausted.• The performance of the battery may temporarily deteriorate and the operating time maybecome shorter in low temperature conditions (e.g. skiing/snowboarding).Inserting/Removing the Battery/Card (Optional)• Check that the camera is turned off.• We recommend using a Panasonic card.1 Slide the release lever in the direction ofthe arrow and open the card/battery door.• Always use genuine Panasonic batteries (CGA-S/106B: supplied or DMW-BCF10PP: optional).• If you use other batteries, we cannot guaranteethe quality of this product.2 Battery: Insert it fully being careful aboutthe direction for insert. Pull the lever Ain the direction of the arrow to removethe battery. Card: Push it fully until itclicks being careful about the directionfor insert. To remove the card, push thecard until it clicks, then pull the card outupright.B Do not touch the connection terminals of thecard.• The card may be damaged if it is not fullyinserted.¼