VQT1W2644Advanced (Recording pictures)[REC] mode: · ¿Taking Pictures using Auto BracketIn this mode, 3 pictures are automatically recorded in the selected exposurecompensation range each time the shutter button is pressed. You can select the picturewith the desired exposure from the 3 pictures with different exposures.With Auto bracket d1 EVNote• When setting Auto bracket, [ ] appears on the screen.• When taking pictures using Auto bracket after setting the exposure compensation range, thepictures taken are based on the selected exposure compensation range.When the exposure is compensated, the exposure compensation value appears on the lowerleft of the screen.• The Auto bracket setting is canceled if you turn the camera off or [POWER SAVE] is activated.• When Auto bracket is set, the Auto review function is activated regardless of the Auto reviewsetting. (The picture is not enlarged.) You cannot set the Auto review function in the [SETUP]menu.• The exposure may not be compensated with Auto bracket depending on the brightness of thesubject.• [Œ] is set for the flash when Auto bracket is set.• Burst is canceled when Auto bracket is set.• Auto bracket cannot be used when in [TRANSFORM], [HI-SPEED BURST], [FLASH BURST],[STARRY SKY], [PIN HOLE], [FILM GRAIN] and [PHOTO FRAME] in Scene mode.1st picture 2nd picture 3rd pictured0 EV j1 EV i1 EVPress 3 [È] several times until [AUTO BRACKET]appears, set the compensation range of theexposure with 2/1.• When you do not use Auto bracket, select [OFF] (0).Press [MENU/SET] to finish.• You can also press the shutter button halfway to finish.