VQT1W2680Advanced (Playback)∫ To print the dateAfter setting the number of prints, set/cancel printing with the recording date by pressing[DISPLAY].• When you go to a photo printing store for digital printing, be sure to order the printing of thedate additionally if required.• Depending on the photo printing store or the printer, the date may not be printed even if you setto print the date. For further information, ask at your photo printing store or refer to theoperating instructions for the printer.• The date cannot be printed on pictures stamped with text.Note• The number of prints can be set from 0 to 999.• With a printer supporting PictBridge, the date print settings of the printer may take precedenceso check if this is the case.• It may not be possible to use the print settings with other equipment. In this case, cancel all thesettings, and reset the settings.• If the file is not based on the DCF standard, the print setting cannot be set.You can set protection for pictures you do not want to be deleted by mistake.Select [PROTECT] on the [PLAYBACK] mode menu. (P19)Press [‚] to return to the menu screen.• Press [MENU/SET] to close the menu.∫ Canceling all the [PROTECT] settings1 Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].2 Press 3 to select [YES] and then press [MENU/SET].3 Press [MENU/SET] to close the menu.• If you press [MENU/SET] while canceling protection, the canceling will stop halfway.P [PROTECT]Press 3/4 to select [SINGLE] or [MULTI] and thenpress [MENU/SET].Select the picture, and then press[MENU/SET].When [MULTI] has been selected• Repeat these steps for each picture.• The settings are canceled when [MENU/SET] is pressed again.[SINGLE] [MULTI]Press 2/1 toselect the picture.Press 3/4/2/1to select thepictures.