- 87 -RecordingFor details on [Rec] Mode menu settings, refer to P36.Pictures are taken continuously while the shutter button is pressed.Select the ones you really like from the pictures you have taken.Applicable modes: ñ·¿[ON]/[OFF]Note• Focus, exposure, and White Balance will be fixed to the settings for the first picture. Dependingon changes in the brightness of the subject, the recording may be brighter or darker from thesecond picture.• When the Self-timer is used, the number of recordable pictures in Burst Mode is fixed to 3.• The burst speed (pictures/second) may become slower depending on the recordingenvironment such as in dark places, if the ISO sensitivity is high etc.• Burst Mode is not canceled when the camera is switched off.• If you take pictures in Burst Mode with the built-in memory, it will take time to write the picturedata.• [Œ] is set for the flash when burst is set.• You cannot use Burst Mode in following conditions.– In [Panorama Assist], [Handheld Night Shot], [Hi-Speed Burst], [Flash Burst], [Starry Sky],[Fireworks] and [Photo Frame] in Scene Mode– In [Pin Hole] in My Color Mode– When recording motion picturesFor details on [Rec] Mode menu settings, refer to P36.Using these modes, the pictures can be made sharper or softer, the colors of the picturescan be turned into sepia colors or other color effects can be achieved.Applicable modes: ñ·_1 This can be set only when Intelligent Auto Mode is set._2 This can be set only during Normal Picture Mode.[Burst]Burst speed (pictures/second) approx. 3.7Number of recordable pictures max. 7 pictures[Color Mode][ ] ([STANDARD]) This is the standard setting.[ ] ([Happy])_1 Image with enhanced brightness and vividness.[ ] ([NATURAL])_2 The picture becomes softer.[ ] ([VIVID])_2 The picture becomes sharper.[ ] ([B/W]) The picture becomes black and white.[ ] ([SEPIA]) The picture becomes sepia.[ ] ([COOL])_2 The picture becomes bluish.[ ] ([WARM])_2 The picture becomes reddish.