Panasonic Lumix DMC-FX78 Basic Owner's Manual

Also see for Lumix DMC-FX78: Specifications Owner's manual Basic owner's manual Owner's manual Owner's manual

Contents

Connecting to other equipment- 128 -Preparations:Turn on the camera and the PC.Remove the card before using the pictures in the built-in memory. USB connection cable (supplied)• Check the directions of the connectors, and plug them straight in or unplug them straight out.(Otherwise the connectors may be bent out of shape which may cause malfunction.) Align the marks, and insert.• Use a battery with sufficient battery power or the AC adaptor (optional) and DC coupler(optional). If the remaining battery power becomes low while the camera and the PC arecommunicating, the alarm beeps.Refer to “ Disconnecting the USB connection cable safely” (P130) before disconnecting theUSB connection cable. Otherwise, data may be destroyed.Connect the camera to a PC via the USB connection cable (supplied).• Do not use any other USB connection cables except the supplied one. Use ofcables other than the supplied USB connection cable may cause malfunction.Acquiring of still pictures and [Motion JPEG] motion pictures(other than [AVCHD] motion pictures)Touch [PC].• If [USB Mode] (P42) is set to [PC] in the [Setup] menu in advance, the camera will beautomatically connected to the PC without displaying the [USB Mode] selection screen.• When the camera has been connected to the PC with [USB Mode] set to[PictBridge(PTP)], a message may appear on the PC’s screen. Select [Cancel] to closethe screen, and disconnect the camera from the PC. Then set [USB Mode] to [PC]again.Operate the PC.• You can save the images into the PC by drag and drop the image or the folder with theimage you would like to transfer onto the different folder in the PC.