Connecting to other equipment- 130 -∫ Disconnecting the USB connection cable safely• Proceed with the hardware removal using “Safely Remove Hardware” on the task tray of thePC. If the icon is not displayed, check that [Access] is not displayed on the LCD monitor of thedigital camera before removing the hardware.∫ Connection in the PTP Mode (WindowsR XP, Windows VistaR, WindowsR 7 andMac OS X only)Set [USB Mode] to [PictBridge(PTP)].• Data can now be read only from the card into the PC.• When there are 1000 or more pictures on a card, the pictures may not be imported in the PTPMode.• [AVCHD] motion picture cannot be played back in PTP Mode.Still pictures and motion pictures can be uploaded to image sharing sites (Facebook/YouTube) using the upload tool “LUMIX Image Uploader”.You do not need to transfer the images to the PC or install dedicated software onto the PC,so you can easily upload the images even away from your home or work if there is a PCthat is connected to the network.• It is only compatible with a PC with Windows XP/Windows Vista/Windows 7.(View the operating instructions of the “LUMIX Image Uploader” using Internet Explorer)Preparations:Setup the images to upload with [Upload Set] (P100).Connect the PC to the Internet.Create an account at the image sharing site to be used, and prepare the login information.1 Startup the “LUMIXUP.EXE” by double-clicking it. (P129)• An upload tool “LUMIX Image Uploader” may startup automatically if the“PHOTOfunSTUDIO” software on the CD-ROM (supplied) is installed.2 Select the destination to upload.• Operate following the instructions displayed on the PC screen.Note• Operation cannot be guaranteed for future specification changes of the YouTube and Facebookservices. Service contents or screen may be modified without notice.(This service is as of December 1st, 2010)• Do not upload any images protected by copyright, unless you own the copyright yourself, orhave permission from the relevant copyright holder.Uploading the images to sharing sites
