Others- 144 -Message DisplayConfirmation messages or error messages will be displayed on the screen in some cases.The major messages are described below as examples.[This picture is protected]> Delete the picture after canceling the protect setting. (P110)[Some pictures cannot be deleted]/[This picture cannot be deleted]• Pictures not based on the DCF standard cannot be deleted.> If you want to delete some pictures, format the card after saving necessary data on a PCetc. (P45)[Cannot be set on this picture]• [Title Edit], [Text Stamp] or [Print Set] cannot be set for pictures not based on the DCFstandard.[Not enough space on built-in memory]/[Not enough memory on the card]• There is no space left on the built-in memory or the card.• When you copy pictures from the built-in memory to the card (batch copy), the pictures arecopied until the capacity of the card becomes full.[Some pictures cannot be copied]/[Copy could not be completed]• The following pictures cannot be copied.– When a picture with the same name as the picture to be copied exists in the copydestination. (Only when copying from a card to the built-in memory.)– Files not based on the DCF standard.• Moreover, pictures recorded or edited by other equipment may not be copied.[Built-In Memory ErrorFormat built-in memory?]• This message will be displayed when you format the built-in memory on a PC.> Format the built-in memory on the camera again. (P45) The data on the built-in memorywill be deleted.[Memory card error.This card cannot be used in this camera.Format this card?]• It is a format that cannot be used with this unit.> Insert a different card.> Format the card again with the camera after saving necessary data on a PC etc. (P45)Data will be deleted.[Please turn camera off and then on again]/[System Error]• This message appears when the camera is not operating properly.> Turn the camera off and on. If the message persists, contact the dealer or your nearestService Center.
