63Using the Wi-Fi function(ENG) SQT0196Setting up a connection to a PC via a wirelessaccess pointPrepare folders for receiving images on the PC before sending a picture to the PC.• Create a PC user account [account name (up to 254 characters) and password (up to 32characters)] consisting of alphanumeric characters. An attempt to create a receive folder mayfail if the account includes non-alphanumeric characters.∫ When using “PHOTOfunSTUDIO”1 Install “PHOTOfunSTUDIO” to the PC.• For details on hardware requirements and installation, read “ About the supplied software ”(P66).2 Create a folder that receives images with “PHOTOfunSTUDIO”.• To create the folder automatically, select [Auto-create]. To specify a folder, create a newfolder, or set a password to the folder, select [Create manually].• For details, refer to the operating instructions of “PHOTOfunSTUDIO” (PDF).∫ When not using “PHOTOfunSTUDIO”(For Windows)Supported OS: Windows XP/Windows Vista/Windows 7/Windows 8/Windows 8.1Example: Windows 71 Select a folder you intend to use for receiving, then right-click.2 Select [Properties], then enable sharing of the folder.• For details, refer to the operating instructions of your PC or Help on the OS.(For Mac)Supported OS: OS X v10.5 to v10.9Example: OS X v10.81 Select a folder you intend to use for receiving, then click on the items in thefollowing order.[File] [Get Info]2 Enable sharing of the folder.• For details, refer to the operating instructions of your PC or Help on the OS.You can send pictures and motion pictures recorded with this unit to a PC.The connection methods described in this manual are examples. For details on otherconnection methods, refer to “Owner’s Manual for advanced features (PDF format)”.To create a folder that receives imagesWhen sending images to PCPreparations:• If the workgroup of the destination PC has been changed from the standard setting, you alsoneed to change the setting of this unit in [PC Connection].
