72OthersSQT0196 (ENG)Message DisplayConfirmation messages or error messages will be displayed on the screen in some cases.The major messages are described below as examples.• Please also refer to the “Owner’s Manual for advanced features (PDF format)”, which describesmore detailed information.[Some pictures cannot be deleted]/[This picture cannot be deleted]• This feature can only be used with pictures that comply with the DCF standard.Perform formatting (P18) on this unit after saving necessary data on a PC, etc.[Memory Card Error]/[This memory card cannot be used]• Use a card compatible with this unit. (P17)[Insert SD card again]/[Try another card]• An error has occurred accessing the card.Insert the card again.• Insert a different card.[Read Error/Write ErrorPlease check the card]• It has failed to read or write data.Remove the card after turning this unit off. Insert the card again, turn this unit on, and try toread or write the data again.• The card may be broken.• Insert a different card.[This battery cannot be used]• Use a genuine Panasonic battery. If this message is displayed even when a genuinePanasonic battery is used, contact the dealer or Panasonic.• If the battery terminal is dirty, clean it and remove any objects.[Failed to connect wireless access point]/[Connection failed]/[No destination found]• Check following regarding the wireless access point.– The wireless access point information set on this unit is wrong.Check the authentication type, encryption type, and encryption key.– Power of the wireless access point is not turned on.– Setting of the wireless access point is not supported by this unit.• Check the network setting of the destination.• Radio waves from other devices may block the connection to a wireless access point.Check other devices that are connected to the wireless access point and devices that use the2.4 GHz band.[No picture to send]• This is displayed when there is no image to transmit due to the restriction of the destination.Check the file format of the image to send.
