512. Preparations before Recording• Press the shutter button halfway or turn the camera off and on to cancel [Sleep Mode].• To turn the monitor/viewfinder on again, press any button.• When the monitor/viewfinder automatic switching (P57) is activated, [Auto LVF/Monitor Off] iscanceled.• [Economy] does not work in the following cases.– When connecting to a PC or a printer– When recording or playing back motion pictures– During a slide show– [Multi Exp.]– [Time Lapse Shot]– When [Auto Shooting] in [Stop Motion Animation] is set to [ON].• When using the AC adaptor (optional), [Sleep Mode] is disabled.• When using the AC adaptor (optional), [Auto LVF/Monitor Off] is fixed to [5MIN.].[Economy]The unit can be set up to prevent unnecessary batteryconsumption.[Sleep Mode]:The camera is automatically turned off if the camera has not beenused for the time selected on the setting.[10MIN.]/[5MIN.]/[2MIN.]/[1MIN.]/[OFF][Auto LVF/Monitor Off]:The monitor/viewfinder is automatically turned off if the camerahas not been used for the time selected on the setting.[5MIN.]/[2MIN.]/[1MIN.][USB Mode]Select the USB communication system when connecting thecamera to your PC or your printer with the USB connection cable(supplied).y [Select on connection]:Select either [PC] or [PictBridge(PTP)] if you connected thecamera to a PC or a printer supporting PictBridge.{ [PictBridge(PTP)]:Set when connecting to a printer supporting PictBridge.z [PC]:Set when connecting to a PC.
