66To create the central band of sharpness you need to press the Fn3(function 3) button adjacent to the navigation buttons. This opens adisplay where the vertical (for landscape images), or horizontal (forportrait images) position of the band can be set using the navigationbuttons ▼▲ for landscape mode and ►◄ for portrait mode. The backcontrol dial adjusts the width of the band. If you press the DISP button theoriginal positions are restored. The image may take a while to process inthe camera after the shutter has closed, especially if the image size islarge.Soft focus - the image effect control adjusts the amount of soft focus blurapplied to the image.Star filter - with this filter enabled any highlights are transformed into stareffects. The image effect control adjusts the length of the highlight pointsfrom short to longer.One point color - with this effect you can select the color that is to beretained in the black and white image which is generated. Use the Fn3button to display the setting screen. Align the small central frame on thecolor you wish to retain in the image and then press MENU/SET. Somecolors may not be totally removed and areas of similar tone may beremoved. The image effect control adjusts the saturation of the remainingcolor.Examples of Creative Control EffectsImages using the expressive control featuresExpressive color low Expressive color highAdjusting the control to the left reduces the effect and to the rightincreases it.
