Panasonic Lumix DMC-FZ3 Operating Instructions Manual

Also see for dmc fz3 - Lumix Digital Camera: Operating instructions Operating instructions Operating instructions Instrucciones básicas de funcionamiento

Contents

Others108Message Display[NO MEMORY CARD]Insert the card.[THIS MEMORY CARD IS PROTECTED]Cancel the card lock.[NO VALID IMAGE TO PLAY]Play back after recording or after insertinga card with a recorded picture.[MEMORY CARD FULL/NOT ENOUGH MEMORY IN THE CARD]Insert a new card or delete theunnecessary data.[PLEASE CLOSE THE FLASH]Be sure to close the flash after use.[MODE DIAL IS NOT IN THE PROPERPOSITION]This message appears when you turn thecamera on with the mode dial in the wrongposition.Rotate the mode dial to the proper position.[PLEASE SET THE CLOCK]This message appears when you use thecamera for the first time or you do not usethe camera for a long time. Set the clock.[THIS PICTURE IS PROTECTED]After canceling the protect setting, you candelete or overwrite the picture.[THIS PICTURE CAN’T BE DELETED /SOME PICTURES CAN’T BE DELETED]The pictures not based on the DCFstandard cannot be deleted.[CAN’T BE SET ON THIS PICTURE /CAN’T BE SET ON SOME PICTURES]If the pictures are not based on the DCFstandard, the DPOF print cannot be set.[NO ADDITIONAL DELETE SELECTIONSCAN BE MADE]You have exceeded the number of picturesthat can be set at once with multi-deletesetting.[MEMORY CARD ERROR FORMAT THISCARD?]The format of the card cannot berecognized by this camera. Format the cardagain with this camera.[PLEASE TURN CAMERA OFF ANDTHEN ON AGAIN]This message appears when the cameradoes not operate properly. Turn the cameraoff and on. If the message persists, contactthe dealer or your nearest servicenter.[MEMORY CARD ERROR]Failed access to the card.Insert the card again.[READ ERROR]Data reading error.Play it back again.[WRITE ERROR]Data writing error.Turn the camera off and remove the card.Then insert the card and turn the cameraon again. Be sure that the camera is turnedoff before removing or inserting the card toavoid damage.