Playback (advanced)116VQT0R81Playing Back Pictures on a TV Screen∫ Playing back pictures with AV cable(supplied)• Turn the camera and the TV off.1 Connect the AV cable A(supplied) to the [AV OUT] socketof the camera.• Connect the AV cable with the [ ]mark facing the [1] mark on the[AV OUT] socket.• Hold the AV cable at B and insertstraight in and take straight out.2 Connect the AV cable to the videoinput and the audio input socketsof the TV.• 1 Yellow: to the video input socket• 2 White: to the audio input socket3 Turn the TV on and select externalinput.4 Turn the camera on and then setthe mode dial to playback mode[ ].∫ Viewing pictures in other countriesWhen setting [VIDEO OUT] on the[SETUP] menu, you can view images onthe TV in other countries (regions) whichuse the NTSC or PAL system.• Even if you set menu selection for[VIDEO OUT] to [PAL], the output signal isstill NTSC in the recording mode.∫ Playback pictures on TV with SDMemory Card slotStill pictures recorded to an SD MemoryCard can be played back on TVs with anSD Memory Card slot.(Pictures may not be displayed on a fullscreen, depending on the model of TV.MultiMediaCard may not be played back onTV with SD Memory Card slot.)• Motion pictures cannot be played back. Toplay back motion pictures, connect thecamera to a TV with the AV cable(supplied).• Do not use any other AV cables except thesupplied one.• Read the TV operating instructions too.• Audio playback is in monaural.• When you connect the camera to a TVand play back a picture vertically, it maybe blurry. (When using the AV cable)• When you connect the camera to a TVand play back a picture, you may not beable to see one part of the edges of thescreen. This is due to the specifications ofthe TV and is not a malfunction.REMOTEDC IN 8.4VAV OUT/DIGITAL
