Panasonic Lumix DMC-LZ7P Service Manual

2TABLE OF CONTENTS PAGE PAGE1 Safety Precaution -------------------------------------------------31.1. General Guidelines ----------------------------------------31.2. Leakage Current Cold Check ---------------------------31.3. Leakage Current Hot Check (See Figure 1.)--------31.4. How to Discharge the Capacitor on Flash TopPCB------------------------------------------------------------42 Warning --------------------------------------------------------------52.1. Prevention of Electro Static Discharge (ESD)to ElectrostaticallySensitive (ES) Devices -----------52.2. How to Replace the Lithium Battery-------------------63 Service Navigation------------------------------------------------73.1. Introduction --------------------------------------------------73.2. General Description About Lead Free Solder(PbF) ----------------------------------------------------------73.3. Important Notice 1:(Other than U.S.A. andCanadian Market) ------------------------------------------73.4. How to Define the Model Suffix (NTSC or PALmodel)---------------------------------------------------------84 Specifications ---------------------------------------------------- 115 Location of Controls and Components------------------ 126 Service Mode ----------------------------------------------------- 136.1. Error Code Memory Function ------------------------- 136.2. Confirmation of Firmware Version ------------------- 167 Service Fixture & Tools --------------------------------------- 177.1. Service Fixture and Tools ------------------------------ 177.2. When Replacing the Main PCB ---------------------- 187.3. Service Position ------------------------------------------ 188 Disassembly and Assembly Instructions --------------- 198.1. Disassembly Flow Chart-------------------------------- 198.2. PCB Location---------------------------------------------- 198.3. Disassembly Procedure -------------------------------- 208.4. Disassembly Procedure for the Lens --------------- 248.5. Assembly Procedure for the Lens ------------------- 268.6. Removal of the CCD Unit ------------------------------ 279 Measurements and Adjustments -------------------------- 289.1. Matrix Chart for Replaced Part and NecessaryAdjustment ------------------------------------------------- 2810 Maintenace -------------------------------------------------------- 2910.1. Cleaning Lens and LCD Panel ----------------------- 29