VQT3E45 47For details about the setting procedure in the [Rec] menu (→26)[Rec Quality]Set the picture size of motion pictures.■ Mode:■ Settings:Picture Quality Picture Size No. of Frames Picture Aspect Ratio[HD] 1280 × 720 pixels30 fps16:9[VGA] 640 × 480 pixels 4:3[QVGA]∗ 320 × 240 pixels∗ [QVGA] is fixed when recording to the built-in memory.●Depending on the motion picture recording environment, static electricity orelectromagnetic waves may cause the screen to go black momentarily or noise to berecorded.●When recording motion pictures, it is recommended to use a sufficiently chargedbattery or an AC adaptor (optional) and DC coupler (optional).●When recording motion pictures using an AC adaptor, if you unplug the AC adaptor or apower outage occurs, power to the camera is cut, and the motion picture in progress isno longer recorded.●If you attempt to play motion pictures recorded with the camera on other devices,playback may not be possible, or the picture or sound quality may be poor.Additionally, incorrect recording information may be indicated.[Sensitivity]Set ISO Sensitivity (sensitivity to lighting) manually.We recommend higher settings to take clear pictures in darker locations.■ Mode:■ Settings: [ ] (Intelligent ISO) / [100] / [200] / [400] / [800] / [1600]Setting guide[Sensitivity] [100] [1600]Location(recommended)Bright(outdoors) DarkShutter speed Slow FastInterference Low HighJitter of the subject Increased Less●[ ] is automatically set in a range up to 1600 based on subject movement andbrightness.●Scope of flash recording (→37)