74 VQT3E45Q&A TroubleshootingTry checking these items (→74 - 79) first.If the problem persists, performing [Reset] in the [Setup] menu may resolve the issue.(Note that except for some items such as [Clock Set], all settings are returned to theirvalues from the time of purchase.)Battery, powerCamera does not work even if power is turned on.●Battery is not inserted correctly (→11), or needs recharging.The power cuts off during use.●Battery needs recharging.●Camera is set to [Auto Power Off]. (→28)→ Turn on the power again.RecordingCannot record pictures.●The camera is in Playback Mode.→ Press the Playback button to switch to Recording Mode.●Built-in memory/card is full. → Free space by deleting unwanted pictures (→25).Recorded pictures look white.●Lens is dirty (fingerprints, etc.).→ Clean lens surface with a soft, dry cloth.●Lens is foggy (→4).Recorded pictures are too bright/too dark.●Adjust the exposure (→38).2-3 pictures are taken when I press the shutter button just once.●Camera is set to use [Burst] (→50).Focus not aligned correctly.●Not set to mode appropriate for distance to subject. (Focus range varies according toRecording Mode.)●Subject outside of focus range.●Caused by jitter or subject movement (→52).Recorded pictures are blurred. Optical Image Stabilizer ineffective.●Shutter speed is slower in dark locations and Optical Image Stabilizer is less effective.→ Hold camera firmly with both hands, keeping arms close to body.→ Set [Digital Zoom] to [OFF] and [Sensitivity] to [ ]. (→47, 50)R●●B●Rss●●M●●●T●M●B●