Panasonic Lumix DMC-S3 Operating Instructions Manual

Also see for Lumix DMC-S1: Owner's manual Basic owner's manual Basic operating instructions Basic owner's manual Basic operating instructions

72 VQT3E65 VQT3E65 73Meanings and required responses to major messages displayed on LCD monitor.Message displays[Some pictures cannot be deleted] [This picture cannot be deleted]●Non-DCF pictures (→22) cannot be deleted.→ Save needed data on a computer or other device, and then use [Format] on thecamera. (→30)[No additional selections can be made]●The number of pictures that can be deleted at once has exceeded.●More than 999 pictures have been set as [Favorite].●The number of pictures allowing [Resize] (multiple settings) at once has exceeded.[Please turn camera off and then on again] [System Error]●The lens is not working correctly.→ Turn on power again.(Consult the dealer or your nearest Service Centre if display still remains)[Some pictures cannot be copied] [Copy could not be completed]●Pictures cannot be copied in the following cases:→ Picture of same name already exists in built-in memory when copying from card.→ File is not of DCF standard.→ Picture taken or edited on a different device.[Not enough space on built-in memory] [Not enough memory on the card]●There is no space left on the built-in memory or the card. When you copy pictures fromthe built-in memory to the card (batch copy), the pictures are copied until the capacityof the card becomes full.[Built-In Memory Error] [Format built-in memory?]●Displayed when formatting built-in memory via computer, etc.→ Reformat directly using camera. Data will be deleted.[Memory card error. This card cannot be used in this camera. Format this card?]●The card format cannot be used with this camera.→ Save needed data on a computer or other device, and then use [Format] on thecamera. (→30)[Insert SD card again] [Try another card]●Access to card has failed.→ Insert card again.●Try with a different card.[Memory Card Error] [Memory card parameter error]●Card is not of SD standard.●When cards in capacities of 4 GB or more are used, only SDHC or SDXC MemoryCards are supported.[Read Error]/[Write Error] [Please check the card]●Data read has failed.→ Check whether card has been inserted correctly (→11).●Data write has failed.→ Turn off power and remove card, before re-inserting and turning on power again.●Card may possibly be damaged.●Try with a different card.[Motion recording was cancelled due to the limitation of the writing speed of thecard]●When recording motion picture, use a card rated with an SD speed class∗ of “Class 6”or higher.∗ SD speed class refers to a specification for sustained write speeds.●If recording stops even when using a card with speed of “Class 6” or faster, the datawriting speed is low. We recommend backing up the data on the memory card andreformatting it. (→30)●Motion picture recording may be automatically terminated with certain cards.[A folder cannot be created]●Folder numbers in use have reached 999.→ Save needed data on a computer or other device, and then use [Format] on thecamera. (→30)[Picture is displayed for 16:9 TV] [Picture is displayed for 4:3 TV]●AV cable is connected to camera.→ To remove message immediately → Press [MENU/SET].→ To change aspect ratio → Change [TV Aspect] (→29).●USB connection cable is only connected to camera.→ Message disappears when cable is also connected to another device.