Panasonic Lumix DMC-S3 Operating Instructions Manual

Also see for Lumix DMC-S1: Owner's manual Basic owner's manual Basic operating instructions Basic owner's manual Basic operating instructions

12 VQT3E65 VQT3E65 13Inserting and removing the card (optional)/the battery (Continued)■To remove• To remove battery:move lever in direction of arrow.• To remove card:press down in centre.Lever●Always use genuine Panasonic batteries.●If you use other batteries, we cannot guarantee the quality of this product.●Remove battery from camera after use.• Keep the battery in a plastic bag, making sure that it is kept away from metallicobjects (such as clips) when carrying or storing the battery.●To remove the card or battery, turn the camera off and wait until the LCD monitordisplay is completely blank. (Failure to wait may cause the camera to malfunction andmay damage the card or recorded data.)●Keep the Memory Card out of reach of children to prevent swallowing.Using the DC coupler (optional) instead of batteryBy using the AC adaptor (optional) and DC coupler (optional), you can record and playback without worrying about the remaining battery charge.The optional DC coupler can only be used with the designated Panasonic AC adaptor.Insert DC coupler instead ofbatteryOpen DC coupler cover• If difficult to open, press the DCcoupler cover from inside to open it.Close the card/battery doorand slide the door in untilyou hear a locking soundPlug AC adaptor into poweroutletConnect AC adaptor to DC INsocket of DC coupler●Always use a genuine Panasonic AC adaptor (optional).●Use the AC adaptor and DC coupler specifically for this camera. Using other adaptorsor couplers could cause camera failure.●The possibility to install the camera on a tripod or unipod when the DC coupler isconnected depends on the type of tripod or unipod.●The camera cannot stand upright when the AC adaptor is connected. If you are leavingthe camera on a surface as you work, it is recommended to place it on a soft cloth.●When the AC adaptor is connected, always remove the AC adaptor when opening thecard/battery door.●Remove the AC adaptor and DC coupler when not in use and close the coupler cover.●Also read the AC adaptor and DC coupler operating instructions.DC IN socket DC couplerDC coupler coverTo connect, face thecable mark to the LCDmonitorAC adaptor