26 VQT1P79 VQT1P79 27Preparations5 Using SETUP menu (Continued)VIDEO OUTChange the video outputformat when connectedto a TV, etc.NTSC /PAL• Operates when AV cable is connected.TV ASPECTChange the aspect ratiowhen connected to a TV,etc. (PLAYBACK modeonly)./• When set to , pictures will be displayed vertically longon LCD monitor. (Operates when AV cable is connected.)m/ftChange display unitfor distance in focusalignment (P.41).m : Display in metersft : Display in feetSCENE MENUDisplay scene menuwhen mode dial is set toSCN1 or SCN2. (P.44)OFF/ AUTO (displays scene menu)• To display scene menu when set to ‘OFF’: Press ‘MENU/SET’.DISPLAYSCENE MODE 1PORTRAIT21SETSELECTDIAL DISPLAYDisplay mode dialoperation on screen.OFF/ ON (display)NORMAL PICTUREFORMATUse when ‘BUILT-INMEMORY ERROR’or ‘MEMORY CARDERROR’ appears.YES/NO• This requires a sufficiently charged battery (P.16) or ACadaptor (DMW-AC5PP, sold separately).(Only inserted card will be formatted if present; internalmemory will be formatted if no card is inserted.)• Always format cards with this camera.• All picture data including protected pictures will bedeleted. (P.79)• Do not turn off power or perform other operations duringformatting.• Consult your nearest Service Center if format cannot besuccessfully completed.• Formatting the built-in memory may take several minutes.LANGUAGEChange displaylanguage.ENGLISH / DEUTSCH (German) / FRANÇAIS (French) /ESPAÑOL (Spanish) / ITALIANO (Italian) / (Chinese)/ (Japanese)Not displayed on DMC-TZ5P/DMC-TZ4P.DEMO MODEView demonstration offunctions.JITTER, SUBJ. MOVE DEMO.: (Only during recording)Extent of jitter and of subject movement are shown ongraph. (Estimate)Movement detectionJitterLarge ← Small → Large• To stop→ Press display button (P.14).• Recording and zoom cannot be performed during demo.• Use the movement detection demo with objects withcontrasting coloring.AUTO DEMO. :View introductory slideshow• To close → Press ‘MENU/SET’• Demo cannot be outputted to TV.Item Settings, notes Item Settings, notes