Panasonic Lumix DMC-TZ5 Operating Instructions Manual

Also see for LUMIX DMC-TZ4: Operating instructions Operating instructions Operating instructions Operating instructions Operating instructions

82 VQT1P79 VQT1P79 83Connectingwith otherdevices 1 Using with your PC (Continued)Connectingwith otherdevices 2 PrintingNew folders are created in the following cases:• When pictures are taken to folders containing files numbered 999.• When using cards already containing the same folder number (including picturestaken with other cameras, etc.)• When recording after performing ‘NO. RESET’ (P.25)• File may not be able to be played back on camera after changing file name.• If mode dial is set to , built-in memory data (including clipboard pictures) aredisplayed even when card is inserted. Data in card is not displayed.• When using Mac OS X ver.10.2 or earlier, set write-protect switch on card to ‘LOCK’whenever handling pictures on SDHC memory cards.If using Windows XP, Windows Vista, or Mac OS XThe camera can be connected to your computer even if ‘USB MODE’ (P.25) is set to‘PictBridge (PTP)’.• Only picture reading operations can be performed via the camera (picture deletionalso possible with Windows Vista).• It may not be possible to read if there are 1000 or more pictures on the card.To play motion pictures on your computerUse the ‘QuickTime’ software on the supplied CD-ROM.• Installed as standard on MacintoshSave motion pictures to your computer before viewing.To cancel print Press ‘MENU/SET’Do not use any other USB connection cables except the supplied one.Disconnect USB connection cable after printing.Turn off power before inserting or removing memory cards.When the battery begins to run out during communication, the status indicator flashesand a warning beep sounds. Cancel printing and disconnect USB connection cable(recharge the battery before reconnecting).Setting the ‘USB MODE’ (P.25) to ‘PictBridge (PTP)’ remove the need to make thesetting each time the camera is connected to the printer.You can connect directly to a PictBridge-compatible printer for printing.Set-up:• Connect the camera to the ACadaptor (DMW-AC5PP, sold separately).(Alternatively, use a sufficiently-chargedbattery.)• Card :Insert cardBuilt-in memory: :Remove card(Copy clipboard picturesto the card (P.65))• Adjust settings on your printer (print quality,etc.) as required.• Set mode dial to any setting other thanCLIPBOARD.Built-inmemory/CardWindowsDrives are displayed in‘My Computer’ folder.MacintoshDrives are displayed onthe desktop.(Displayed as ‘LUMIX’,‘NO_NAME’, or‘Untitled’.)JPG:Still picturesMOV:Motion picturesFolder and file names on computerYou can save images to use on your computer by dragging and dropping folders andfiles into separate folders on your computer.DCIM (Still/motion pictures)100-PANA (Up to 999 pictures/folder)P1000001.JPGP1000999.JPG101-PANA:999-PANAMISC (DPOF files)PRIVATE1 (clipboard pictures) Built-inmemoryMEMO0001.JPG1 Turn on power of bothcamera and printer2 Set REC/PLAY switch to3 Connect camera toprinter4 Select ‘PictBridge (PTP)’on the cameraPictBridge(PTP)PCPLEASE SELECTTHE USB MODEUSB MODESETSELECTWhen ‘CONNECTING TO PC…’ isdisplayed, cancel the connectionand set ‘USB MODE’ to either‘SELECT ON CONNECTION’ or‘PictBridge(PTP)’ (P.25).5 Select picture to printwith ◄► and set6 Select ‘PRINT START’SETSELECTCANCELPRINT STARTPRINT WITH DATENUM. OF PRINTSPAPER SIZEPAGE LAYOUTSINGLE SELECTOFF(Print settings → P.85)Check socket directionand insert straight in.(Damage to socketshape can lead to faultyoperation.)• Do not disconnectthe USB connectioncable when the cabledisconnection iconis displayed (may notbe displayed with someprinters).USB connection cable(always use cablesupplied)Hold hereIf using AC adaptor, turn off camera power before plugging in or removing.