18 VQT1P79Preparations2 Inserting battery and card(Continued)Remaining battery and memory capacity1010Pictures remaining(P.100)Displayed when no card inserted (pictures will be saved to built-in memory)Remaining battery (only when using battery)(flashes red)(Status indicator flashes when LCD monitor is off)Recharge or replace battery (P.16).When in operation(Card) or (Built-in memory) are illuminated red.This means that an operation is in progress, such as the recording, reading, or deletingof pictures. Do not turn off the power or remove the battery, card, or AC adaptor (DMW-AC5PP, sold separately) (this may cause damage to or loss of data).Picture save destination (cards and built-in memory)Pictures will be saved to a card if one is inserted, or to the built-in memory if not.Compatible memory cards (sold separately)The following SD standard-based cards (Panasonic brandrecommended)• SD memory cards (8 MB - 2 GB)• SDHC memory cards (4 GB - 16 GB)Can only be used with devices compatible with SDHCmemory cards.• Cards of over 4 GB may only be used if they have the SDHClogo.Always format cards with this camera. (P.27)If the switch on the card is set to ‘LOCK’, operations such as formatting, recording, anddeleting cannot be performed.MultiMediaCards may also be used (for still pictures only)Built-in memory (approx. 50 MB)Internal memory is slower than SD memory card.Clipboard pictures (P.64) are saved to built-in memory.Pictures may be copied between cards and the built-in memory (P.80).Switch(LOCK)SDHC memory cardSDHC logoIt is recommended that you copy important pictures to your computer (aselectromagnetic waves, static electricity, or faults may cause data to be damaged).For model numbers and types,see http://panasonic.co.jp/pavc/global/cs (This Site is English only.)Downloaded From camera-usermanual.com Panasonic Manuals