Panasonic Lumix DMC-ZS1 Operating Instructions Manual

Also see for DMC ZS1S - Lumix Digital Camera: Instrucciones de funcionamiento

Contents

80 VQT1Z82Using REC/MOTION PICTURE menu(Continued)REC/PLAY switch: See P.18 for menu setting procedure.REC QUALITYSets the picture quality of the motion picture that is recorded.MODE: → MOTION PICTURE menu→ REC menuSettings:‘AVCHD Lite’ in REC MODESetting Resolution Bit rate 1 Aspect ratioSH 1280 x 720 17 Mbps16:9H 1280 x 720 13 MbpsL 1280 x 720 9 Mbps‘MOTION JPEG’ in REC MODE /Setting Resolution Frame rate 2 Aspect ratioHD 1280 x 720 30 fps 16:9WVGA 848 x 480 30 fpsVGA 640 x 480 30 fps 4:3QVGA 320 x 240 30 fps1 The bit rate is the amount of data per unit time. A higher value translates into a higher imagequality. This camera uses the VBR (Variable Bit Rate) recording system and the available recordingtime is shorter when recording a subject with rapid movements.2 The frame rate is the number of frames per second.‘WVGA’ cannot be set in INTELLIGENT AUTO Mode.‘QVGA’ only can be recorded to the built-in memory.CONTINUOUS AFEither allow the focus to be constantly adjusted during motion picture recording, or fix thefocus position at the start of recording.MODE: → MOTION PICTURE menu→ REC menuSettings: ON: Adjust focus according to movement of subject during motionpicture recording. ( appears on the screen.)OFF: Fix focus position at the start of motion picture recording.Use this setting to keep the same focus position for subjects with littleforward/backward movement.WIND CUTReduces recording of wind sounds (wind noise) when recording in a strong windMODE: → MOTION PICTURE menuSettings: OFF/ON ( appears on the screen.)When WIND CUT is set to ‘ON’, lower sounds will be eliminated and the sound qualitywill differ from that of normal recordings.URbiWIND CUT is not available in the DMC-ZS1.