VQT3G90 127PrintingYou can connect directly to aPictBridge-compatible printer forprinting.Getting Ready:• Charge the battery sufficiently. Or,connect the AC adaptor (optional) andDC coupler (optional).• When copying pictures from thebuilt-in memory, remove any memorycards.• Adjust the print quality or othersettings on your printer, as needed.Connect camera to printer• Please make sure you use the supplied USB connection cable. Use of cablesother than the supplied USB connection cable may cause malfunction.Use cursor button on the camera to select [PictBridge (PTP)],and press [MENU/SET]Use cursor button to select a picture to print and press[MENU/SET]Use cursor button to select [Print start] and press [MENU/SET](Print settings (→129))■To cancel print Press [MENU/SET]●Do not use any other USB connection cables except the supplied one.●Disconnect USB connection cable after printing.●Turn off power before inserting or removing memory cards.●When the battery begins to run out during communication, a warning beep sounds.Cancel printing and disconnect USB connection cable. Use a sufficiently chargedbattery or an AC adaptor (optional) and DC coupler (optional).●AVCHD motion pictures cannot be printed.Check socket direction and insert straight in.(Damage to socket shape can lead to faultyoperation.)• Do not disconnect the USB connection cablewhen the cable disconnection icon is displayed(may not be displayed with some printers).USB connection cable(always use cable supplied)r
