78 VQT3G90Recording the place of recording with GPS(Continued)Recording Mode:FIi■Executing positioning immediately and updating your current locationIf there is a discrepancy in the displayed information such as the location name or ifpositioning has failed, move to a place where the signals from the GPS satellite can bereceived more easily, and update the positioning.Select [Repositioning] from the [GPS] menuPositioning starts.The GPS status indicator lights during positioning.GPS status indicator• When you select [GPS] or in the [GPS Setting] displayed in the Quick menu(→41) and close the Quick menu, positioning will be executed.■Concerning the positioning intervalsEven if you do not manually update positioning, positioning is attempted automaticallyimmediately after the power has been turned on and at a fixed intervals after thatunless [GPS Setting] is [OFF].When [GPS Setting] is [ON], positioning is tried at fixed time intervals even when thepower is off.However, positioning is canceled under the following conditions.• When the battery power is low and has appeared.• When the power has not been turned on for a certain length of time.■To display the GPS reception statusSelect [GPS Setting] from the [GPS] menu.Use the cursor button to select [INFO] and press [MENU/SET].• You can start positioning by pressing [MENU/SET] again.●GPS reception status display: Received GPS time: Number of GPS satellite signals received: LatitudeLongitude
