- 165 -Using with your PCConnect camera to computer• Please make sure you use the supplied USB connection cable.Use of cables other than the supplied USB connection cable may causemalfunction.Use cursor button on the camera to select [PC], and press[MENU/SET]• A message may be displayed on screen if [USB Mode] (→58) is set to[PictBridge(PTP)]. Select [CANCEL] to close the screen, and set [USB Mode] to [PC].• When [USB Mode] (→58) is set to [GPS assist data], the folder storing the pictureswill not be displayed. Set [USB Mode] to [PC]. DMC-ZS20Operate with your computerYou can save pictures to use on your computer by dragging and dropping foldersand files into separate folders on your computer.■To cancel connectionWindows: Execute “Safely Remove Hardware” on the taskbarMac: Open the Finder and click the eject icon that appears on the sidebar■When using Windows XP, Windows Vista, Windows 7, or Mac OS XThe camera can be connected to your computer even if [USB Mode] (→58) is set to[PictBridge(PTP)].• Only picture output can be performed.• It may not be possible to import if there are 1000 or more pictures on the card.• Motion pictures cannot be read. (Excluding [High Speed Video])Preparation:• Charge the batterysufficiently.• When importing pictures fromthe built-in memory, removeany memory cards.• Turn on the camera andcomputer.Check socket direction and insert straight in.(If the cable is inserted in the wrong direction, the socketcould become deformed and cause faulty operation)[Access] (sending data)• Do not disconnectthe USB connectioncable while [Access] isdisplayed.USB connection cable(always use cable supplied)Copying still pictures and motion pictures recorded in [MP4] and[High Speed Video] Scene Mode (except AVCHD motion pictures)
