- 55 -Using the [Setup] menuItem Settings, notes[Volume]Adjust volume of soundfrom speakers (7 levels).[0] / [1] / [2] / [3] / [4] / [5] / [6]• Cannot be used to adjust TV speaker volume whenconnected to TV.[Cust.Set Mem.]Register settings oncurrent camera. (→85)[C1] / [C2-1] / [C2-2] / [C2-3][LCD Display]Adjust brightness andcolor of the LCD monitor.Press to select the setting item and press tomake adjustmentsPress [MENU/SET]• Some subjects may look different from their actualappearance, but the recorded picture will not be affected.[LCD Mode]Make LCD monitor easierto see.[Auto Power LCD]:The brightness is adjusted automatically depending onhow bright it is around the camera.[Power LCD]:Makes screen brighter than normal (for outdoor use).[OFF]• Cannot select [Auto Power LCD] in playback mode.• [Power LCD] returns to ordinary brightness if there is nooperation for 30 seconds when recording. (Press anybutton to make the screen brighter again.)• Because the picture shown on the LCD monitor screenemphasizes brightness, some subjects may look differentthan their actual appearance, but this will not affect therecorded picture.• Setting [LCD Mode] reduces the operating time.• For details about the setting procedure in the [Setup] menu (→51)
