Panasonic Lumix DMC-ZS3 Operating Instructions Manual

Also see for DMC-ZS3 - Lumix 10MP Digital Camera: Operating instructions Instrucciones de funcionamiento Operating instructions Basic operating instructions Operating instructions

Contents

104 VQT1Z82PrintingTo cancel print Press ‘MENU/SET’Do not use any other USB connection cables except the supplied one.Disconnect USB connection cable after printing.Turn off power before inserting or removing memory cards.When the battery begins to run out during communication, the status indicator flashesand a warning beep sounds. Cancel printing and disconnect USB connection cable(recharge the battery before reconnecting).Setting the ‘USB MODE’ (P.24) to ‘PictBridge (PTP)’ removes the need to make thesetting each time the camera is connected to the printer.Motion pictures recorded in ‘AVCHD Lite’ format cannot be printed.You can connect directly to a PictBridge-compatible printer for printing.Set-up:• Use a fully charged battery, or connect theAC adaptor (DMW-AC5PP, sold separately)and Multi Conversion Adaptor (DMW-MCA1,sold separately). (P.103)• Card : Insert cardBuilt-in memory: Remove card(Copy clipboard pictures tothe card (P.82))• Adjust settings on your printer (print quality,etc.) as required.• Set mode dial to any setting other thanCLIPBOARD.Turn on power of bothcamera and printerConnect camera to printerPlease make sure you use thesupplied USB connection cable. Useof cables other than the suppliedUSB connection cable may causemalfunction.Select ‘PictBridge (PTP)’on the cameraWhen ‘CONNECTING TO PC…’ isdisplayed, cancel the connectionand set ‘USB MODE’ to either‘SELECT ON CONNECTION’ or‘PictBridge(PTP)’ (P.24).Select picture to printwith and setSelect ‘PRINT START’(Print settings P.106)Check socket direction and insert straight in.(Damage to socket shape can lead to faultyoperation.)• Do not disconnect the USB connection cable whenthe cable disconnection icon is displayed (maynot be displayed with some printers).USB connection cable(always use cable supplied)