158 VQT2R48Q&A Troubleshooting (Continued)Recording (continued)Brightness or colouring of recorded picture different from real life.Taking pictures under fluorescent lighting may require a faster shutter speed and result in slightlychanged brightness or colouring, but this is not a fault.Red banding may appear on the LCD monitor or part or the entire screenmay have a reddish tint, when recording or pressing the shutter buttonhalfway.This is a characteristic of CCD and may appear if subject contains brighter areas.Some blurring may occur around these areas, but this is not a fault. This will berecorded in motion pictures, but not in still pictures.We recommend keeping the screen away from strong light sources such as sunlight when takingpictures.Motion picture recording stops midway.With some cards, access display may appear briefly after recording, and recording may end midway.Using a card of SD speed ‘Class 4’ or above is recommended for recording motion pictures in[AVCHD Lite(GPS REC)]/[AVCHD Lite].Using a card of SD speed ‘Class 6’ or above is recommended for recording motion pictures in‘MOTION JPEG’. The SD speed class is a speed rating for continuous writing.If recording stops even when using the card above, the data writing speed is low. We recommendbacking up the data on the memory card and reformatting it (28).The subject cannot be locked. (AF track fails)If the subject has different colours as the periphery, set the AF area to those colours specific to thesubject by aligning that area with the AF area. (100)LCD monitorLCD monitor dims during motion picture recording.LCD monitor may dim if continuing motion picture recording for long periods.Brightness is unstable.Aperture value is set while shutter button is pressed halfway.(Does not affect recorded picture.)Monitor flickers indoors.Monitor may flicker after turning on (prevents influence from fluorescent lighting).Monitor is too bright/too dark.Camera set to [LCD MODE] (23).Black/blue/red/green dots or interference appears. Monitor looks distorted whentouched.This is not a fault, and will not be recorded on the actual pictures, so there is no need to worry.Date/age is not displayed.Current date, travel elapsed days (90), and names and ages in [BABY] and [PET] (65) SceneModes are only displayed for approx. 5 sec. when the camera is turned on, after these settingsare made, or after switching from Playback Mode to Recording Mode, etc. They cannot be alwaysdisplayed.
