Panasonic MALHxxxYG Series Specifications

Zener DiodesPublication date: October 2008 SKE00047AED 1This product complies with RoHS Directive (EU 2002/95/EC).MALHxxxYG SeriesSilicon planar typeFor constant voltage, constant current, waveform clipper and surge absorption circuit Features Extremely low noise voltage caused from the diode Extremely good rising performance (in the low-current range) Independent wiring of two element Absolute Maximum Ratings Ta = 25°CParameter Symbol Rating UnitRepetitive peak forward current IFRM 200 mATotal power dissipation * PT 150 mWJunction temperature Tj 150 °CStorage temperature Tstg –55 to +150 °CNote) *: P T = 150 mW achieved with a printed circuit board. Common Electrical Characteristics Ta = 25°C±3°CParameter Symbol Conditions Min Typ Max UnitForward voltage VF IF = 10 mA 0.9 1.0 VZener voltage *1 VZ IZ Specified value VZener rise operating resistance RZK IZ Specified value Refer to the list of theelectrical characteristicswithin part numbersWZener operating resistance RZ IZ Specified value WReverse current IR VR Specified value mATemperature coefficient of zener voltage *2 SZ IZ Specified value mV/°CNote) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 measuring methods for diodes.2. Absolute frequency of input and output is 5 MHz.3. The temperature must be controlled 25°C for V Z mesurement.V Z value measured at other temperature must be adjusted to V Z (25°C)4. *1 : V Z guaranted 20 ms after current flow.*2 : Tj = 25°C to 150°C Package CodeSMini4-F2 Pin Name1: Anode 1 3: Cathode 22: Anode 2 4: Cathode 1 Marking symbolRefer to the list of the electricalcharacteristics within part numbers

/ 4

Related manuals for Panasonic MALH024YGL