Panasonic MC-UG614 Operating Instructions Manual

Also see for MC-UG614: Operating instructions

Panasonic MC-UG614 Operating Instructions Manual Manual pdf 19 page image

-19-Vacuum cleaner won’t run. 1. Unplugged at mains socket. 1. Plug in firmly, select the desiredsetting on the touch control.2. Tripped circuit breaker replace 2. Reset circuit breaker or fuse.at household service panel.3. Thermal protector tripped. 3. Allow vacuum cleaner to cool40-50 minutes. (page 6)4. Defective mains socket. 4. Check with a good applianceor lamp. Have socket properlyserviced.Poor job of dirt pick-up. 1. Full or clogged dust bag. 1. Change bag. (page 13)2. Wrong pile height setting. 2. Adjust setting. (page 8)3. Worn agitator. 3. Replace agitator. (page 17)4. Clogged nozzle or bag holder. 4. See CLOG REMOVAL. (page 15)5. Motor protection system 5. Check for clogs. (page 15)activated.6. Dirty secondary filter and/or 6. Clean or change filters.exhaust filter. (page 14)Vacuum cleaner picks up 1. Wrong pile height setting. 1. Adjust setting. (page 8)moveable rugs or pushes toohard.Agitator does not turn. 1. Handle in full upright position. 1. Move handle from uprightposition.2. Belt protector tripped. 2. Reset belt protector. (page 6)Sound changes. 1. New carpet fuzz clogged air path. 1. See BYPASS VALVE (page 6).2. See CLOG REMOVAL (page 15).PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTIONBefore contacting your Panasonic service centre, check the following points:NOTE: Failure to correctly maintain your product, for example regular cleaning and unblocking, may result in a chargeif referred to a service agent for attention.L) TROUBLESHOOTINGWARNINGDisconnect electrical supply before performing maintenance to the vacuum cleaner. Failure to do so couldresult in electrical shock or personal injury.