Panasonic MINAS-BL GV Series Technical Instructions

Also see for MINAS-BL GP series: Technical instructions Instructions Manual

Contents

－ E5 －－ E4 －EnglishDo not hold the motor cable or motor shaft dur-ing the transportation.Failure to observe this instructioncould result in injuries.Be sure to perform transportation and installationwithout drops and falls.Failure to heed theserequirements will result inpersonal injury or malfunction.Do not get on the product.Do not place heavy object on the product.Failure to observe this instructioncould result in electrical shocks,injuries, breakdowns and dam-ages.Do not use the equipment under direct sunshine. Failure to heed these instructionswill cause personal injury or fire.Do not block the heat dissipating holes or putthe foreign particles into them.Failure to observe this instructioncould result in electrical shocksand fire.Do not give strong impact shock to the Product.Failure to observe this instructioncould result in breakdowns.Do not give strong impact shock to the motorshaft.Never run or stop the motor with the electro-magnetic contactor installed in the main powerside.Do not make an extreme gain adjustment orchange of the drive.Do not keep the machine running/operating un-stably. Failure to observe this instructioncould result in injuries.Do not approach to the machine since it maysuddenly restart after the power resumption.Design the machine to secure the safety for theoperator even at a sudden restart.Never attempt to perform modification, dismantleor repair.The failure to heed this instructionwill result in fire, electric shock,personal injury or malfunction.Do not turn on and off the main power of theamplifier repeatedly.The failure to head this instructioncan cause malfunction.Make an appropriate mounting of the Productmatching to its wight and output rating. The failure to heed this instructioncan result in personal injury ormalfunction.Observe the specified mounting method anddirection.Do not place any obstacle object which blocksair passage around the motor, amplifier andperipheral.Temperature rise due to poorventilation can cause burn injuryor fire.Adjust the motor and amplifier ambient environ-mental condition to match the motor operatingtemperature and humidity. Failure to heed these require-ments will result in personal injuryor malfunction.Provide the specified space between theamplifier and inner surface of the control paneland other devices.Observe the specified voltage.Operation from a voltage higherthan the rated voltage will causeelectric shock, personal injury orfire.Install a safety device against idling or locking ofgear head, and leakage of grease.Lack of protection will causepersonal injury, property damageor pollution.Use the motor and the amplifier in the specifiedcombination.Wrong combination will causemalfunction or fire duringoperation.Test-run the securely fixed motor without loadingto verify normal operation, and then connect it tothe mechanical system.Operation with wrong model orwrong wiring will cause bodilyinjury.If trip occurs, remove the causes of the trip andsecure the safety before restarting.The failure to head this instructionwill cause bodily injury.When failure occurs at the amplifier, turn offpower to the amplifier.Continuous high current flow willcause fire.Correctly run and arrange wiring. Wrong connection will causeinjury or electric shock.Always keep power disconnected when thepower is not necessary for a long time.The failure to head this instructionwill cause improper operationthat could result in hazards topersonnel.Maintenance must be performed by an experi-enced personnel.Wrong connection will causeinjury or electric shock.This Product shall be treated as Industrial Waste when you dispose.CautionSafety Precautions Please observe safety precautions fully.