17How to UseWhen the unit is not in useStarts boilingautomatically.Notifies when boiled. Fall in temperature( )Automatically switchesto 190 keep-warmUnplug, and remove the lid. Pour out any remaining hot water slowly viathe mark.Lid release part Operation panelCautions● Do not pour out water too quickly.If water is splashed over lid release section oroperation panel, it may cause a malfunction.● Do not leave water standing in the container.It may cause the container to corrode or smell.Connect the power plug after filling with water and close the lid. (1 → 2)beep beepbeep beepLight onCharging battery indicator (for cordlessdispensing)Light offLight onWater temperature indicatorWhen changing the setting of keep warm temperature (☞ P. 19)When adjusting the temperature suitable for tea (☞P. 19)Press Press toPour Dispensing speed of hot water varies depending ondegree of pressing and dispensing time.Light onAutomatically locked in 10 seconds afterdispensing is finished.Charging battery indicator. (for cord-less dispensing)Guideline for dispensing volumeBattery chargevolume Dispensing volumeApprox. 3L or more (4.0L type)Almost full volume (3.0L types) w 11.5L or lessDispensing period (Amount of time to press continuously)Less than 5 seconds From 5 to 12 seconds More than 12 secondsPress slightlyPress strongly* Be careful of hot water splashing if pressed too stronglyWith cordless dispensing, and before the waterboils, there are only two speeds*1 Full water volume may not be indicated if dispensedfrequently .● Indication lights off and cannot dispense hot waterafter 8-10 hours even if not dispensed.Water temperature falls about 194°F(90°C) in 3 hours after boiling. (3.0L type) at room temperature68°F(20°C)* Temperature falls quicker if water volume is less.Press