20Care & CleaningCare & CleaningCautions Before cleaning, be sure to disconnect the plug from outlet, dispense water and allow theunit to cool .Main unit and lid● Do not wet or soak the main unit in water.If water enters the main unit from the bottom or from the dispensingspout, it can get into the electrical components in the main unitand may cause a malfunction.● Do not use detergents. ● Do not use benzine or thinner.(They may leave an odor.) (They may damage the surface.)Clean with a damp, well-wrung cloth.Inner container● Do not use abrasivessuch as polishingpowder, a scrub brushor a nylon brush. They may damage thefluororesin finish of the inner container.Clean with a wet sponge.Clean the inner container usingcitric acid. (See P.21)About "Scale"While you are using this unit, mineralscontained in the water (like calcium) can getstuck on the inner container or on the meshfilter. This is called "scale", and it is harmless.● Milky-white gritty surface (caused by calcium)● White or glittering floating material(crystals of minerals)● Discoloration in the finish like dark brown,gray, or green areas(metallic ion formed on the fluororesin covering)This is not discoloration or corrosion of theinner container itself, nor is it flakes from thefluororesin covering.Mesh filterWhen filter is clogged, water does not flowsmoothly.* After cleaning the filter,be sure to reattach itto the inner container.Clean the filter with a brush.Before storing the unit● Dry it thoroughly.● Put it into a plastic bag and seal the bag.DailyMaintenanceClean withCitric Acid