RGCRECORD^.-^AUSEFNGLISHPROGRAMME AERecordingAfter setting the [OFF/ON] Switch to [ON] to turn the MovieCamera on and sotting the Mode Selector Switch to [AUTO]O* you can start recording simply by pressing the RecordingStert/Stop Button. In this case, the Movie Camera adjusts thefocus and white balance fully automatically.•Depending on the light source and recording situation,correct automatic focusing and white balance adjustmentmay not be possible. In such cases, adjust them manually.Foais: 106): White Balance: 100,102,104)1 Set the [OFF/ON] Switch to [ONJ.The [CAMERA] Lamp lights. ^2 Press the Recording Start/Stop Button.•Recording starts.•The [RECORD] Indication appears briefly and thenchanges to [REC]. 0To pause recording:Press the Recording Start/Stop Button again.TTje [PAUSE] Indication appears. 0To finish recording:Set the [OFF/ON] Switch to [OFF],•Be sure to remove the Lens Cap before setting the [OFF/ON] Switch to [ON]. If the Lens Cap is attached to the Lenswhen you set the [OFF/ON] Switch to [ON], the automaticwhite balance adjustment 168) may not be precise.•If you leave the Movie Camera In the Recording PauseMode for more than 6 minutes, it automatically switchesoff to protect the tape and to conserve battery power. Toresume recording from this condition, set the [OFF/ON]Switch to [OFF] end then to [ON] again.Recording Lamp (Tally Lamp)The Recording Lamp lights 0 during recording to let thepeople In front of the Movie Camera know that recording isbeing performed.If you set [REC LAMP] on the [OTHER FUNCTIONS]Sub-Menu to [OFF], the Recording Lamp does not light.-44-