37To Select a Desired File and Play It Back1 Set the [TAPE/CARD/CARD MODE] Selector to [CARD].2 Slide the [TAPE/CARD/CARD MODE] Selector to[CARD MODE] until the desired type of data indicationappears. (NV-GS5 only)3 Press the [MULTI] Button.≥The files recorded on the Card are displayed in Multi-Picture Mode. 14 Turn the [PUSH] Dial and select a desired file.≥The selected file is marked with a frame.≥When 7 or more files have been recorded, turn the [PUSH] Dial todisplay the next file. (The [6] Button or [5] Button can be usedinstead of the [PUSH] Dial.)5 Press either the [PUSH] Dial or the [MULTI] Button.≥The selected file is shown on the entire screen.2 Picture Size (When [PICTURE] is selected at Step 2)FINE or NORMAL (When [MPEG4] is selected at Step 2)3 File Number4 Folder-File Number (When [PICTURE] or [MPEG4] is selected at Step 2)Using File Search Mode1111Set [CARD FUNCTIONS] >> [CARD EDITING] >>[FILE SEARCH] >> [YES].2222Turn the [PUSH] Dial and select the desired file number, andpress the [PUSH] Dial. 5≥For other notes concerning this item, see page 46.~~~~~~~~~~~~~~~~~~~~~~~~~Recording Pictures on a Card to a TapeCard Images can be recorded on the Tape one at a time or all automatically.After setting to Card Playback Mode, please carry out the followingprocedures.To Copy 1 Picture1 Slide the [TAPE/CARD/CARD MODE] Selector to[CARD MODE] until the [PICTURE] Indication appears.(NV-GS5 only)2 Display a desired picture.3 Set the [TAPE/CARD/CARD MODE] Selector to [TAPE].4 Press the [PHOTO SHOT] Button.≥During the copying, the indication 1 appears.≥It takes a few seconds to record a picture to the Tape.≥When recording to tape, select the tape position before recording. Thepicture will be recorded to the tape position when the [PHOTO SHOT]Button is pressed at Step 4.To Copy All the Pictures1111Slide the [TAPE/CARD/CARD MODE] Selector to[CARD MODE] until the [PICTURE] Indication appears.(NV-GS5 only)2222Display the first picture.≥If a picture other than the first one is displayed, only the subsequentpictures will be copied.3333Set [CARD FUNCTIONS] >> [CARD EDITING] >>[RECORD TO TAPE] >> [YES].≥During the copying, the indication 1 appears.≥It takes a few seconds for each picture to be copy on the Tape. To stopthe copying midway, press the [∫] Button.≥Moving Picture (MPEG4) and Voice data cannot be recorded from a Card totape. (NV-GS5 only)≥For other notes concerning this item, see page 47.3, 51, 2153 4PICTURENo.25 100-00142640640640640640640FILE SEARCHPRESS MENU TO RETURN14, 52M ENUTAPE CARDCARDCARD MODE MULTI/P-IN-P1NOW RECORDINGREC41, 313MENUTAPE CARDCARDCARD MODEPHOPHOTOSHOSHOT