Before Use-14-To Increase the Brightness of the Entire LCDMonitorPress the [POWER LCD] Button.When you press the [POWER LCD] Button, theLCD monitor becomes bright about twice asmuch as usual.The [POWER LCD] Lamp (26) lights up.≥When turning the power on with using ACAdaptor, [POWER LCD] function isautomatically effective.To Resume Normal BrightnessPress the [POWER LCD] Button again.To Change the Picture Quality of the LCDMonitor (NV-GS200 only)Set the [LCD AI] on the [LCD/EVF] Sub-Menu to[ON] or [OFF].[ON]: The screen image becomes clear andvivid. (The effect varies according to therecording scene.)≥When Power LCD Lamp lights up, [LCD AI] isautomatically set to [ON]. You cannot changethis setting. (NV-GS200 only)≥These adjustments do not affect the recordedimages.≥For other notes concerning this item, see -65-.Using the Menu ScreenTo facilitate the selection of a desired function orsetup, this Movie Camera displays variousfunction setups on Menus.≥When operating the menu with the Viewfinder,set [LCD/EVF] >> [EVF ON/AUTO] >> [ON] orrotate the LCD monitor by 180o.1 Press the [MENU] Button (14).POWERLCD(26)STILLENTERFADEMENUis(14)≥The Menu corresponding to the Modeselected by using the Mode Dial (39) isdisplayed.2 Press the [;/∫] Button to select a desiredSub-Menu.≥Press the [;/∫] Button to display thehighlighted item.3 Press the [5] Button to display theselected Sub-Menu.4 Press the [;/∫] Button to select the item.5 Press the [5] Button to display theselected item.6 Press the [;/∫] Button to select the desiredmode and press [ENTER] Button todetermine the setting.≥While a Menu is displayed, you cannot record orplay back. Menus can be displayed duringplayback but not during recording. The aboveoperations can be done using the [MENU]Button, [π, ∑, ∏, ∫] Buttons and [ENTER]Button on the Remote Controller. (-6-)To Return the Previous ScreenPress the [6] Button.To Exit the Menu ScreenPress the [MENU] Button again.About the Menu Mode SettingThe setting selected on the Menu will be retainedeven when the Movie Camera is turned off.However, if the Battery or AC Adaptor isdisconnected before turning off the MovieCamera, the selected setup may not be retained.(The setups of [EFFECT2] (-33-) are not retained.)≥Menu operation flow is shown in this text by >>.ª File Selection in the Picture/MPEG4Playback Mode (MPEG4 PlaybackMode on NV-GS200 Model only)A File Selection Operation may be necessaryduring Menu Operations. In this case, carry outthe following procedure.1 Press the [;/∫/6/5] Button and selecta file.≥The selected file is marked by a frame.PCSD(39)PICTURENo.25 100-0012