Playback Mode-38-To Change the Enlarging Area of an Image3 Press the Arrow Button (π, ∑, ∏, ∫) (63)on the Remote Controller that points to thearea you want to enlarge.To Cancel the Playback Zoom FunctionPress the [P.B. ZOOM] Button (81) on theRemote Controller.≥For other notes concerning this item, see -59-.Playback Digital Effect FunctionsDuring playback, special digital effects can beadded to the recorded pictures. The same effectsas those of Digital Effects 1 and 2, which areused during recording, are obtained.1 Press the [1] Button (79).2 Press the [SELECT] Button (66) on theRemote Controller to select a desired digitaleffect.≥When the [SELECT] Button is pressedrepeatedly, the digital effect selectionchanges.≥The same setting can be done using[EFFECT SEL] Sub-Menu on the[TAPE PLAYBACK MENU].To suspend Playback Digital EffectTemporarilyPress the [OFF/ON] Button (68) to suspend orrestart the digital effect. When the digital effect ispaused temporarily, the selected effect’sindication flashes.To Cancel the Digital EffectPress the [SELECT] Button (66) on the RemoteController and clear the digital effect indication.ª Wipe Mode and Mix Mode1 Press the [1] Button (79).INDEX INDEXS CSTOPK L∫V/REWSTILL ADVWsVPLAYPAUSEFF/WSTILL ADV6 1 5;E DP.B. ZOOM(79)SELECTSTOREOFF/ONP.B.DIGITALENTERVAR.SEARCH MENU(66)(68)INDEX INDEXS CSTOPK L∫V/REWSTILL ADVWsVPLAYPAUSEFF/WSTILL ADV6 1 5;E DP.B. ZOOM(79)2 Press the [SELECT] Button (66) on theRemote Controller and select [WIPE] or[MIX].3 Press the [STORE] Button (67) at themoment you want to save as a still picture.≥The [B] or [C] Indication appears, andthe image is saved.4 Press the [OFF/ON] Button (68) in the scenein which you want to use the Wipe or Mixeffect.≥The scene changes as a result of the Wipe orMix effect.≥The Wipe Function and Mix Function can beused only from the Remote Controller duringplayback.≥If the [OFF/ON] Button (68) is pressed whileWipe or Mix is carried out, the effect will stoptemporarily at that point. Pressing the [OFF/ON]Button (68) again will bring back the effect.≥For other notes concerning this item, see -60-.Playing Back a CardIt plays back files recorded on a Card.1 Set the Mode Dial (39) to Picture PlaybackMode or MPEG4 Playback Mode. (MPEG4Playback Mode on NV-GS200 Model only)2 Start Playback.[PICTURE]:1: Starting the Slide Show5: Playing back the next picture6: Playing back the previous picture∫: Stop the Slide Show;: Pause the Slide Show[MPEG4] (NV-GS200 only):1: Playing back the File5: Selecting the next file (When you tap itduring playback, you can search the nextfile, and when you keep pressing it, cueplayback is activated.)6: Selecting the previous file (When you tap itduring playback, you can search thebeginning of the file, and when you keeppressing it, review playback is activated.)SELECTSTOREK L∫OFF/ONP.B.DIGITALENTERVAR.SEARCH MENU(66)(67)(68)PCSDPCSD(39)