Panasonic NV-GS300 Operating Instructions Manual

Also see for NV-GS280: Operating instructions How to use

Contents

Edit mode48VQT0T16Printing pictures by directlyconnecting to the printer (PictBridge)To print pictures by directly connecting the moviecamera to the printer, use a printer compatiblewith PictBridge. (Read the operating instructionsfor the printer.)≥Insert a card and set to Card Playback Mode.1 Connect the movie camera and the printerwith the supplied USB cable.1 USB cable≥The [PictBridge] indication appears on thescreen of the movie camera.(When the printer is being recognized, the[PictBridge] indication blinks.)≥When no card is inserted in the movie camera,the [PictBridge] indication does not appear.(You cannot print any pictures.)≥When the movie camera and the printer are notconnected properly, the [PictBridge] indicationkeeps blinking. (It will blink for over approx.1minute.) Connect the cable or check the printer.≥We recommend using the AC adaptor as thepower supply.≥When images are displayed in multi-screen,they cannot be printed.2 Select [SINGLE PRINT] or [DPOF PRINT].≥If there is no file with a DPOF setting, youcannot select [DPOF PRINT].≥When you select [DPOF PRINT] for printing,set the number of prints in DPOF setting.≥When [DPOF PRINT] is selected, print afteryou determine the paper size. (Step 6)≥When [DPOF PRINT] is selected,dateprinting is unavailable.3 Move the joystick left and right to select adesired picture, and then press it.4 Select the desired number of prints.≥You can set up to 9 prints.5 Select the setting for date printing.≥If the printer is not capable of date printing,this setting is unavailable.6 Select [PAPER SIZE].[STANDARD]: Size specific to the printer[4a5 INCH][5a7 INCH][4a6 INCH][A4]≥You cannot set paper sizes not supported onthe printer.7 Select [PAGE LAYOUT].[STANDARD]: Layout set on the printer[ ] : No frame[ ] : With frame≥You cannot set a layout not supported on theprinter.8 Set [PRINT] >> [YES] to start printing.ª When you stop printing halfwayMove the joystick down.≥Avoid the following operations during printing.These operations disable proper printing.≥Disconnecting the USB cable≥Removing the card≥Switching the mode dial≥Turning off the power≥Check the settings for the paper size, quality ofprint, etc. on the printer.≥Still pictures recorded on other equipment maynot be printed.≥When the movie camera and the printer areconnected in the Tape Recording/Playback Mode,the [ ] Indication may appear on the LCDmonitor. However, pictures cannot be printed.≥The sides of pictures recorded when [16:9] isset may be cut at printing. (When you purchasethis unit, [REC ASPECT] is set to [16:9].) Whenusing a printer with a trimming or borderlessfunction, cancel this setting. (Refer to theoperating instructions of the printer for details.)1PictBridge